079-40029532,  +91 9712950637

TransPuls Synergic 2700




The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding.

  • TransPuls Synergic 2700 CMT

    • Portable pulse welding with 270 A
    • Multivoltage
    • Output of up to 270 A

    The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitized and microprocessor-controlled MIG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG, TIG and electrode welding.

    With the TransPulsSynergic 2700 MV, pulse welding becomes portable. Highest precision, exact reproducibility and best weld properties, anytime, anywhere. The Multivoltage version switches between the different mains voltages automatically.

    Technical Data

    Mains voltage 3 x 200 - 240 V
    Mains voltage 3 x 380 - 460 V
    Mains voltage tolerance + 10 % / - 10 %
    Mains frequency 50 / 60 Hz
    Mains fuse protection 25 A
    Mains fuse protection 16 A
    Primary continuous current (100 %) 6,4 - 14,2 A
    Primary continuous power (kVA) 4,6 - 10,7 kVA
    Cos phi 0,99
    Degree of efficiency 88 - 91%
    Welding current range MIG/MAG 3 - 270 A
    Welding current range TIG 3 - 270 A
    Welding current range, electrode 10 - 270 A
    Duty cycle at 10 min/40° C (104° F) 35 % d.c. at 270 A
    Duty cycle at 10 min/40° C (104° F) 100 % d.c. at 170 A
    Open-circuit voltage 50 V
    Working voltage MIG/MAG 14,2 - 27,5 V
    Working voltage TIG 10,1 - 20,8 V
    Working voltage Electrode 20,4 - 30,8 V
    Protection IP 23
    Type of cooling AF
    Insulation class B
    Dimensions l/w/h mm 625/290/475
    Dimensions l/w/h (inches) 24.6/11.4/18.7
    Weight kg 27
    Weight lb 59.5
    Marks of conformity CE
    Marks of conformity CSA
    Safety S
  • TransPuls Synergic 2700 CMT® MV.

    • Portable pulse welding with 270 A
    • Welds sheets of 0.3 mm or thicker
    • Output of up to 270 A

    The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitized and microprocessor-controlled MIG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG, TIG and electrode welding.

    With the TransPulsSynergic 2700 MV, pulse welding becomes portable. Highest precision, exact reproducibility and best weld properties, anytime, anywhere. The Multivoltage version switches between the different mains voltages automatically.

    Technical Data

    Mains voltage 3 x 200 - 240 V
    Mains voltage 3 x 380 - 460 V
    Mains voltage tolerance + 10 % / - 10 %
    Mains frequency 50 / 60 Hz
    Mains fuse protection 25 A
    Mains fuse protection 16 A
    Primary continuous current (100 %) 6,4 - 14,2 A
    Primary continuous power (kVA) 4,6 - 10,7 kVA
    Cos phi 0,99
    Degree of efficiency 88 - 91%
    Welding current range MIG/MAG 3 - 270 A
    Welding current range TIG 3 - 270 A
    Welding current range, electrode 10 - 270 A
    Duty cycle at 10 min/40° C (104° F) 35 % d.c. at 270 A
    Duty cycle at 10 min/40° C (104° F) 100 % d.c. at 170 A
    Open-circuit voltage 50 V
    Working voltage MIG/MAG 14,2 - 27,5 V
    Working voltage TIG 10,1 - 20,8 V
    Working voltage Electrode 20,4 - 30,8 V
    Protection IP 23
    Type of cooling AF
    Insulation class B
    Dimensions l/w/h mm 625/290/475
    Dimensions l/w/h (inches) 24.6/11.4/18.7
    Weight kg 27
    Weight lb 59.5
    Marks of conformity CE
    Marks of conformity CSA
    Safety S
18, 4th Floor, Binali Complex,
Nr. AEC Cross Roads,
Naranpura, Ahmdabad
Gujarat, India.
Mobile No:
+91 9825050637
+91 9712950637